CIAO,
la Campagna Bloccasterzo è diversa in base all'anno modello, ed al mercato della vettura.
Prevede in linea di massima di MODIFICARE impianto elettrico zona BCM, con un kit apposito, e fare un upgrade al software centralina motore.
NON prevede di toccare la zona piantone e bloccasterzo se non in rarissimi casi per noi (mercato USA)
CorrectionDealers are to remove the column lock plate on U.S. and Canadian vehicles equipped with an automatic transmission and U.S. vehicles equipped with a manual transmission. After the service correction, the steering column will no longer lock when the key is removed.
On Canadian and export vehicles equipped with a manual transmission, and export vehicles equipped with an automatic transmission, dealers are to 1) reprogram the PCM, and 2) verify there is adequate lock plate clearance and, if necessary, replace the lock plate. After the service correction, the steering column will continue to lock when the key is removed.


Service ProcedureThe required repairs vary depending on the model year, build date, and whether Customer Satisfaction Program 01044 or Technical Service Bulletin 01-02-35-008 have previously been performed. Refer to the chart below to determine the correct repairs for the vehicle you are working on. After determining the correct repairs for the vehicle you are working on, proceed to the appropriate service procedure.
  PROCEDURE 1A PROCEDURE 1B PROCEDURE 2 PROCEDURE 3
Models Install Wire Kit 89023816 Install Wire Kit 88952428 Reprogram Functional Test
Tech 2 Tech 2 w/SPX Tool
1997-2000 Automatic
(except export vehicles)
All X        
1997-2004 U.S. Manual
All X        
1997 – All Canadian Manual & All Export
All     X   X
1998 All Canadian Manual & All Export
Built through 5/25/98     X   X
Built on or after 5/26/98 and CSC 01044 was performed (V0743)     X X  
Built on or after 5/26/98 and CSC 01044 was NOT performed (V0743)   X X X  
1999-2000 All Canadian Manual & All Export
CSC 01044 or TSB 01-02-35-008 (V0743 or N8505) was performed     X X  
CSC1044 or TSB 01-02-35-008 was NOT performed (V0743 or N8505)   X X X  
2001-2004 All Canadian Manual & Export Manual & All European Export Automatic
All     X X